You are here

Home » Starlane

 

NEW VERSION WITH DOUBLE CONSTELLATION GPS+GLONASS RECEIVER ALLOWING UNMATCHED PRECISION LEVELS, WITH SPECIAL BLUE SILICONE BUTTONS AND GASKETS FOR A FRIENDLY TOUCH AND EXTRA SEALING.

 

 

THE FIRST GPS LAP TIMERS IN THE WORLD TOTALLY
"RIDER AND PC INDEPENDENT"
FOR THE FINISH LINE AND INTERMEDIATES POSITIONING.

 

IF YOU DON'T WANT TO USE YOUR COMPUTER OR PRESS BUTTONS ON THE TRACK, THE SAFD-2 FEATURE (Starlane Automatic Finish line Detection), WILL SPLIT AUTOMATICALLY THE TRACK AFTER THE FIRST 2 LAPS RUN, ALLOWING YOU TO SEE YOUR LAP TIMES AND INTERMEDIATES FROM THE VERY FIRST SESSION WITHOUT ANY ACTION ON THE LAP TIMER.

 

 

With S.E.P.L.A. (Starlane Enhanced Precision Laptiming Algorithm) feature: a lap timing algorithm allowing very high laptiming precision levels.

 

STEALTH GPS-4 allows the data download directly on your USB pendrive, with this solution you can enjoy it without bringing your computer on the track area.
Digirace-MMX software will automatically recognize your USB pendrive and the new sessions to be downloaded.

Another feature making unique Stealth GPS-4 is the possibility to be connected to the optional CAN BUS expansion module that allows the acquisition from external sensors (eg. throttle, gear, RPM, etc.), making your lap timer a data acquisition system.

 

Data Overlay rendered by Starlane DigiRace-MMX 2.0
RID expansion module is available in 3 versions all including a tri-axial ±8G accelerometer:

RID MOTO (code RID1M)
with built in tri-axial ±8G accelerometer + inputs for: RPM, WHEEL SPEED, GEAR and 3 analog channels for: eg. TPS (Throttle Position Sensor), FRONT SUSPENSION and REAR SUSPENSION.

RID KART (code RID1K)
with built in tri-axial ±8G accelerometer + inputs for:: RPM, WATER TEMPERATURE, WHEEL SPEED, GEAR and THERMOCOUPLE type K for exhaust temperature.

RID ANALOG-3 (cod. RID1A3)
with built in tri-axial ±8G accelerometer + N° 3 generic analog inputs for: eg. BRAKE PRESSURE sensor, SUSPENSIONS, etc.

Many RID modules can be connected in line on Stealth GPS-4 CAN BUS increasing the available inputs.

The sensors are optional and available on Starlane catalog, some inputs as for eg. RPM, TPS and WHEEL SPEED, can be accessed directly from the original sensors available by factory on the most common motorbike models.

RID-LAMBDA comes with BOSCH LSU4 Wide Band Lambda sensor and allows the acquisition of Air/Fuel, RPM and Throttle Position values to achieve the best mapping for your engine management system.

 

RPM-TPS-AFR Screen

 

STEALTH GPS-4 FEATURES

 

1) DOUBLE CONSTELLATION GPS+GLONASS RECEIVER AND ANTENNA BUILT IN THE INSTRUMENT:
the Stealth shock-proof ABS body accommodates the new double constellation receiver which uses in symbiosis the american GPS and the russian GLONASS satellite systems. This solution increases dramatically the precision due to the vero high number of satellite involved in instantaneous position, speed, trajectory and lap time determination.

2) YOU CAN SAY GOOD-BYE TO ALL UNPRACTICAL INFRARED TRANSMITTERS ARRANGED ON THE PIT WALL:
the use of the GPS+GLONASS system intended to detect the lap time will make STEALTH GPS-4 completely autonomous, requiring no beacon transmitters, such as the infrared ones used by old-generation systems.
Everything is getting much simpler. It is no longer necessary to arrange the transmitter and to recharge the battery, which is extremely annoying and unpractical, with the risk of forgetting it on the wall or having it stolen.

3) MANAGEMENT OF THE FINISH LINE AND 3 INTERMEDIATES:
You can set up the coordinates of 4 lap trigger lines (main finish line + 3 optional intermediates). Whenever you cross a finish line or an intermediate, STEALTH GPS-4 will indicate the relative split time and store its value. You can therefore quickly evaluate your own performance even if you are driving along a part of the track far from the main straight stretch, which would be expensive and unpractical if you used any other type of lap timer.

4) INDICATION OF THE ACHIEVABLE IDEAL TIME:
by managing intermediates, STEALTH GPS-4 can calculate the time a driver can ideally achieve for every single session. This function is obtained by adding the best sectorial times. This will help you understand the lap time you might have achieved if there had been no traffic in a specific point of the track or if you had done a lap on top of your absolute performance.

5) DOUBLE FUNCTION "BEST LAP" LED:
the "BEST LAP" LED will turn on if you have improved your previous lap and it will blink if the lap you have just done is the best of the session. This solution will supply the driver with all the information necessary for performance without any distraction.
If you have set up intermediate finish lines, the LED is also enabled whenever you cross an intermediate. This means that this instrument is extremely useful to realise without any distraction whether you are improving compared to the same intermediate time of the previous lap or whether you have just accomplished the best intermediate time of the session.

6) GPS SPEED MEASUREMENT:
the advantage of using a GPS+GLONASS system is also that you can measure the vehicle speed with the highest degree of accuracy without having to install any sensor on the vehicle. No user setup is required and, above all, any measurement is always accurate, not altered by the inclination of the vehicle or wheel skidding.

7) DOUBLE HOUR METER FOR THE PERFECT PERIODICAL MAINTENANCE OF THE VEHICLE:
STEALTH GPS-4 has also got two hourmeters that can be separately reset for the periodical maintenance of the vehicle. Hour Meters are activated to receive the GPS speed signal. This solution can operate the hour Meters without any connection to vehicle harness.

8) DATA DOWNLOAD TO USB PENDRIVE:
STEALTH GPS-4 fits a wired USB socket, that can be easily positioned into the fairing, in which you can plug any USB flash memory.
This solution makes the system totally free form the computer, at the end of the track day you will just need to plug the USB pendrive and Stealth GPS-4 will download the acquired data that will be then analyzed directly into the software Digirace-MMX.

9) THE DIGIRACE-MMX SOFTWARE:
it's always possible to download from the website the DigiRace-MMX software that can file, analyse and print the data acquired and graphically represent the paths you have driven across with the relative acceleration and deceleration points for a lap-by-lap comparison.
10) 999-LAP MEMORY WITH AUTOMATIC MANAGEMENT OF 99 TEST SESSIONS:
STEALTH GPS-4 will automatically create a new session whenever you access the track. This means that you can analyse the times you have stored during the various sessions even at the end of the day without having to delete memory whenever you access the track. You can store the Date and Time of every single session as well as the total time, the intermediates, the maximum speed for every single lap.

11)CYCLICAL MEMORY MANAGEMENT:
with STEALTH GPS-4 you will never face memory full issues because,in order to allow a continuous usage, it manages the available space by erasing automatically the oldest sessions when the memory is almost full.

12) STORAGE OF THE FINISH LINE COORDINATES OF THE TRACKS MOST USED:
you can store the coordinates acquired for the finish line of the tracks you are training on most frequently. You can file up to 16 tracks and easily call the finish line of the current track without having to reset it every time.

13) STEALTH GPS-4 IS COMPLETE WITH A BACKLIT LARGE-SIZE GRAPHICAL DISPLAY:
this solution has provided for the development of a software unit that can analyse all stored data and set up all wished functions in an unequally user-friendly and immediate manner. The display is of a transflective type, which means maximum visibility also in the sunlight when backlighting is off.

14) EXTERNAL SUPPLY:
supplied by 12V vehicle battery or by optional cases for 9V batteries or optional batteries. Moreover, STEALTH GPS-4 is complete with powerful energy saving and self power-off functions the user can set up to make the best use of battery performance. It is supplied with a specific extension with eyelets for battery connection and with a connector on one side of the instrument for rapid disconnection.

15) WATER-RESISTANCE:
STEALTH GPS-4 is water resistant and it can also be used in case of rain.

 

The analysis software DigiRace-MMX can be downloaded for free below...

 

Specifications:
 
  • Automatic lap timer with 1/100 second resolution
  • Double constellation 10Hz GPS+GLONASS detection system with aeronautical algorithms
  • Automatic finish line and intermediates positioning function without user intervention (SAFD-2)
  • Calculation of the achievable Ideal Time
  • Calculation and visualization of 3 Intermediates
  • Digital speed indicator
  • GPS speed indication
  • Max. speed = 350 Km/h or 218 Mph
  • Double hour counter for engine maintenance
  • Data download to every USB flash memory stick (stick non included
  • Memory of 999 laps that can be managed in 99 sessions
  • Cyclical memory management with automatic erasing of the oldest sessions.
  • Storage of max. speed values for every single lap
  • Speed indication in Km/h or Mph
  • Setteble self power-off
  • Settable energy saving functions
  • 122x32 backlit graphical display
  • Water resistant
  • Dimensions: width 90 mm - height 45 mm - depth 18 mm
  • Supply : external vehicle 12Volts or optional 9Volts battery cases or optional batteries.
  • Universal installation
  • DigiRace-MMX software available for download
  • Intended use: motorbike - scooter

Content of the package for Stealth GPS-4 Lite (COD. CSTHGPS4LT):
 

  • N° 1 STEALTH GPS-4 Instrument
  • N° 1 Elastic support kit
  • N° 1 Dual Lock Adhesive strap fastening kit
  • N° 1 Supply cable from 12V vehicle battery
  • N° 2 Plastic ties for USB socket fixing
  • N° 1 User Manual

 

ACCESSORIES AND SPARE PARTS
 

RID MOTO - Code: RID1M

CAN BUS module with inputs for: RPM, WHEEL SPEED, GEAR + 3 analog channels + Triaxial Accelerometer.

 

RID LAMBDA - Code: RID1LRT

CAN BUS module with Lambda Sond Bosch LSU4 and inputs for RPM and TPS.

 

RID ANALOG-3 - Code: RID1A3

CAN BUS module with N° 3 generic analog inputs + Triaxial Accelerometer.

 

RID KART - Code: RID1K

CAN BUS module with inputs for: RPM, WATER TEMP., WHEEL SPEED, GEAR, THERMOCOUPLE type K + Acceler.

 

PROFESSIONAL LINEAR SENSOR POT. 150 MM. CONN. M8 - Code: SSLIN150PROM8

Slim stem Linear potentiometric sensor 150mm with M8 plug.

 

PROFESSIONAL LINEAR SENSOR POT. 75 MM. CONN. M8 - Code: SSLIN075PROM8

Slim stem linear potentiometric sensor 75mm stroke M8 plug.

 

LINEAR SENSOR POT. 75 MM. CONN. M8 - Code: SSLIN075M8

Linear potentiometric sensor 75mm. Stroke-Rear Suspension M8.

 

LINEAR SENSOR POT. 150 MM. CONN. M8 - Code: SSLIN150M8

Linear potentiometric sensor 150mm. Stroke-Front Suspension M8.

 

60BAR BRAKE PRESSURE SENSOR CONN. M8 - Code: SSPBK60M8

Brake pressure 60 BAR sensor M10X1 thread conn. M8.

 

MALE-FEMALE 50CM PATCH CONN. M8 - Code: PR50M8

Male-Female 50cm sensor patch cable.

 

MALE-FEMALE 100CM PATCH CONN. M8 - Code: PR100M8

Male-Female 100cm sensor patch cable.

 

MALE-FEMALE 150CM PATCH CONN. M8 - Code: PR150M8

Male-Female 150cm sensor patch cable.

 

ANALOG / SPEED SIGNAL CONNECTION TAIL 20CM - Code: TAP2020

Tail for factory analog ( e.g. Throttle) and vehicle speed sensor connection 20cm. long.

 

WATER TEMPERATURE SENSOR M10X1 - Code: CH2OM10

Water temperature sensor M10X1 to be mounted on the optional water manifolds.

 

WATER MANIFOLD 26MM. DIAM. FOR SENSOR M10X1 - Code: MAN26

Water manifold 26mm. diam. to be used with water sensor code CH2OM10.

 

WATER MANIFOLD 19MM. DIAM. FOR SENSOR M10X1 - Code: MAN19

Water manifold 19mm. diam. to be used with water sensor code CH2OM10.

 

WATER MANIFOLD 10MM. DIAM. FOR SENSOR M10X1 - Code: MAN10

Water manifold 10mm. diam. to be used with water sensor code CH2OM10.

 

INFRARED TYRE TEMPERATURE SENSOR CONN. M8 - Code: SSIRTP05M8

Infrared non-contact tyre temperature sensor M8.

 

BATTERY CASE FOR DOUBLE 9VOLT BATTERY - Code: BPP3C3

External battery case for double 9VOLT commercial batteries type PP3 for Stealth GPS-3/4 and Athon XS.

 

7,4V 2,2AH LI-ION BATTERY - Code: BLI07422

7,4V 2,2Ah Lithium-Ion Battery to be charged only by the specific charger code: BCLIMV.
Compact solution to supply:
-Corsaro through the specific optional cable code PSCOR15M8.
-WID-C modules for Corsaro on vehicles without battery.

 

11,1V 2,2AH LI-ION BATTERY - Code: BLI11122

11,1V 2,2Ah Lithium-Ion Battery to be charged only by the specific charger code: BCLIMV.
Compact solution to supply:
-Corsaro through the specific optional cable code PSCOR15M8.
-WID-C modules for Corsaro on vehicles without battery.

 

BATTERY CHARGER FOR LI-ION MULTIVOLTAGE - Code: BCLIMV

Battery charger for Li-Ion BLI07422, BLI11126 and BLI11122 Batteries.

 

INDUCTIVE SPEED SENSOR Ø 8 MM. - Code: SSPRI8

NPN inductive speed sensor

 

 

MAGNETIC SPEED SENSOR 8 MM CONN M8 - Code: SSPRMG8M8

Magnetic speed sensor (to be used with magnets code MAG6X2).

 

SENSOR BRACKET - Code: SMB

Mounting bracket for 8mm diam. sensors.

 

FRONT AXLE MAGNET RING FOR KART - Code: REOKA

Front axle ring with magnets for kart speed signal (to be used with SSPRMG8M8 speed sensor).

 

REAR AXLE MAGNET RING FOR KART - Code: REOKP

Rear axle ring with magnets for kart speed signal (to be used with SSPRMG8M8 speed sensor).

 

MAGNET 6X2MM FOR SPEED SENSOR - Code: MAG6X2

Magnet 6mm diameter X 2mm thickness to be used with speed sensor SSPRMG8M8.

 

ATHON FIXING KIT FOR MOTOCROSS-SUPERMOTO - Code: KITSUPATHMOT

Support Plate kit for Motocross and Supermoto hadlebar raiser for Stealth GPS 2-3-4, Corsaro and ATHON GPS.

 

ATHON VELCRO STRIP SUPPORT - Code: KITSUPATHSTP

Support kit with velcro strip system for Stealth 2-3-4, Corsaro and ATHON GPS.

 

POWER SUPPLY CABLE STEALTH GPS-3/4 AND ATHON XS - Code: ASPS100M8

Power supply cable for Stealth GPS-3/4 and Athon XS.

 

THERMOCOUPLE K AMPLIFIER CONN. M8 - Code: DAMTKM8

Thermocouple type K amplifier conn.M8 for thermocouple sensor code STKSP and STKM5E.

 

THERMOCOUPLE TYPE K THREAD M5 - Code: STKM5GS

Professional Exhaust Temperature Sensor with exposed joint, M5 male thread.

 

THERMOCOUPLE TYPE K M12 - Code: STKM12GS

Professional Exhaust Temperature Sensor with exposed joint, M12 female flange.


NEW DATA ANALYSIS SOFTWARE FOR ALL STARLANE SYSTEMS
 

Download DIGIRACE-MMX 2.01
Version: 2.01.00018
Release date: 11/05/2016
OS requirement: Windows 10, Windows 8, Windows 7,Windows XP, Vista, (Apple users can install Digirace-MMX if a Windows emulation package is running on the computer).

DIGIRACE-MMX SOFTWARE FOR THE ANALYSIS AND PRINTING OF ACQUIRED TEST SESSIONS

The DigiRace-MMX graphical interface is so user-friendly and intuitive that you can analyse acquired data rapidly and accurately.

Digirace-MMX integrates 2 different analisys levels allowing the rookie user to activate the simplyfied analysis and the most skilled one to switch to professional interface.
It can be used with all Starlane devices (ex. Stealth GPS-3, Athon XS, DaVinci, etc.) by selecting the model in the Device menu.

 

The main functions of DIGIRACE-MMX 2.01:
 
  • Download of the lap times and test sessions with the relative channels analysis.
  • Analysis and overlap of the paths detected by the GPS system.
  • Video and satellite view integration with data.
  • Analysis, printing and saving of downloaded data on files.
  • Recall and print of sessions you have saved before.
  • Choice between Simplyfied and Professional interface.
  • Data export in CSV format for Excel.
  • Lap export for the WWW.STARDROME.COM community.

 

NOW WITH THE INTEGRATION OF YOUR VIDEOS IN THE ANALYSIS SCREENS AND DATA OVERLAY VIDEO EXPORT.

 

SATELLITE VIEW INTEGRATED IN THE SOFTWARE WITH TRAJECTORY VISUALIZATION AND LAP TRIGGERS INSERTION DIRECTLY ON THE SATELLITE VIEWS.

 

ZOOMABLE TRAJECTORY COMPARISON OVERLAYED TO SATELLITE VIEW.

GPS TRACK

The window intended to analyse the GPS track represents the track with the paths run across by the driver. The RED and BLUE areas respectively indicate ACCELERATION and DECELERATION phases. The vehicle position is indicated by a yellow marker you can arrange at your own discretion by using the mouse or the , keys.

PATHS COMPARISON

You can overlap the paths of several laps.